Wifitap包装说明

Wifitap是概念上使用流量注入WiFi网络通信的证明。

Wifitap允许任何应用程序都发送和接收IP数据包使用802.11流量捕获和注入通过WiFi网络简单配置wj0，这意味着：

  • 设置与目标网络地址范围相一致的IP地址
  • 路由通过它所需的业务

尤其是，它是对任意的报文注射在没有特定的库802.11帧的廉价方法。

此外，它会允许一个摆脱任何限制设定在接入点的水平，如绕过客户端之间的通讯防御系统（如思科PSPF）或达到多SSID由同一个接入点进行处理。

资料来源：http://sid.rstack.org/static/articles/w/i/f/Wifitap_EN_9613.html
Wifitap首页 | 卡利Wifitap回购

  • 作者：塞德里克热烫
  • 许可：GPL第二版

包含在wifitap包工具

wifiarp - 无线注入ARP应答工具基于Wifitap
[email protected]:~# wifiarp -h
Psyco optimizer not installed, running anyway...
INFO: did not find python gnuplot wrapper . Won't be able to plot
INFO: Can't open /etc/ethertypes file
Usage: wifitap -b <BSSID> -s <HWSRC> [-o <iface>] [-i <iface>]
                          [-w <WEP key> [-k <key id>]] [-d [-v]]
                          [-h]
     -b <BSSID>    specify BSSID for injection
     -s <HWSRC>    specify source MAC address for 802.11 and ARP headers
     -o <iface>    specify interface for injection (default: ath0)
     -w <key>      WEP mode and key
     -k <key id>   WEP key id (default: 0)
     -d            activate debug
     -v            verbose debugging
     -h            this so helpful output

wifidns - 无线注射DNS应答工具基于Wifitap

[email protected]:~# wifidns -h
Psyco optimizer not installed, running anyway...
INFO: did not find python gnuplot wrapper . Won't be able to plot
INFO: Can't open /etc/ethertypes file
Usage: wifidns -b <BSSID> -a <IP> [-o <iface>] [-i <iface>]
                          [-s <SMAC>] [-t <TTL>] [-w <WEP key>]
                          [-k <key id>]] [-d [-v]] [-h]
     -b <BSSID>    specify BSSID for injection
     -a <IP>       specify IP address for DNS answers
     -t <TTL>      Set TTL (default: 64)
     -o <iface>    specify interface for injection (default: ath0)
     -i <iface>    specify interface for listening (default: ath0)
     -s <SMAC>     specify source MAC address for injected frames
     -w <key>      WEP mode and key
     -k <key id>   WEP key id (default: 0)
     -d            activate debug
     -v            verbose debugging
     -h            this so helpful output

wifiping - 基于Wifitap的WiFi注射基于应答工具

[email protected]:~# wifiping -h
Psyco optimizer not installed, running anyway...
INFO: did not find python gnuplot wrapper . Won't be able to plot
INFO: Can't open /etc/ethertypes file
Usage: wifitap -b <BSSID> [-t <TTL>] [-o <iface>] [-i <iface>]
                          [-s <SMAC>] [-w <WEP key> [-k <key id>]]
                          [-d [-v]] [-h]
     -b <BSSID>    specify BSSID for injection
     -t <TTL>      Set TTL (default: 64)
     -o <iface>    specify interface for injection (default: ath0)
     -i <iface>    specify interface for listening (default: ath0)
     -s <SMAC>     specify source MAC address for injected frames
     -w <key>      WEP mode and key
     -k <key id>   WEP key id (default: 0)
     -d            activate debug
     -v            verbose debugging
     -h            this so helpful output

wifitap - 通过TUN / TAP设备的WiFi注入工具

[email protected]:~# wifitap -h
Psyco optimizer not installed, running anyway...
INFO: did not find python gnuplot wrapper . Won't be able to plot
INFO: Can't open /etc/ethertypes file
Usage: wifitap -b <BSSID> [-o <iface>] [-i <iface>] [-s <SMAC>]
                          [-w <WEP key> [-k <key id>]] [-d [-v]] [-h]
     -b <BSSID>    specify BSSID for injection
     -o <iface>    specify interface for injection (default: ath0)
     -i <iface>    specify interface for listening (default: ath0)
     -s <SMAC>     specify source MAC address for injected frames
     -w <key>      WEP mode and key
     -k <key id>   WEP key id (default: 0)
     -d            activate debug
     -v            verbose debugging
     -h            this so helpful output

wifitap用法示例

[email protected]:~# coming soon